Skip to content
Free on-site quotes across Camberwell and the City of Boroondara (03) 4824 0315
Camberwell Concreting

Driveways / Exposed aggregate / Paths / Patios / Slabs

Shed and garage slabs in Camberwell and Boroondara

Slabs for garden sheds, garages, studios and workshops across the City of Boroondara, with the thickness and mesh specified by what will sit on them. Outbuildings only; we do not pour house or unit slabs.

  • Prepped base built to suit Boroondara's clay
  • Steel mesh reinforcement in every slab
  • Fixed written quote after a site measure

Get a free concreting quote

We look forward to working with you and creating an outstanding finish.

Or call (03) 4824 0315

Free site measure Fixed written quote Insured contractor Camberwell and the City of Boroondara only

From $110 to $150 per m², supplied and laid. Prices may vary with site conditions and variations.

A shed is only as good as the slab under it. A slab that is thin, unreinforced or poured on uncompacted fill will crack under the first vehicle, and by then the structure is bolted to it. The slab is the one part of the project that cannot be fixed later, which is why it is specified before it is priced.

Specified by what sits on it

A garden shed and a workshop with a hoist do not need the same slab, and quoting them the same is how slabs fail. Garden sheds with normal use are poured at 100mm with SL72 mesh. Garages, studios and workshops where vehicles, racking or machinery will sit are poured at 125mm with SL82 mesh, and edges are thickened where the manufacturer requires it. Rebates and hold-down points are formed in to the supplier’s drawings so the frame sits flat and the doors line up. The full build-up, including base preparation for Boroondara’s clay, is on the specification page.

These slabs are for outbuildings. We do not pour dwelling or structural building slabs; for those, talk to your builder’s concreter.

The Boroondara back yard

The slab jobs this municipality produces are rear garages off a shared drive, studios and home offices behind Federation and Edwardian homes, and workshop slabs on the deeper blocks around Balwyn and Glen Iris. Access is usually the deciding factor: the run down the side of a period house is long and narrow, and where a truck cannot reach the pour, the concrete is pumped or barrowed and the quote says so up front rather than as a variation on the day. Where the garage sits on a rebuilt driveway run, pouring both together brings the combined rate down.

What it costs

Shed and garage slabs run $110 to $150 per square metre supplied and laid, with the range driven by thickness, mesh and access. The cost guide has worked examples by slab size, and the calculator gives a range for your dimensions. Booked alongside a driveway, paths or a patio, the combined rate comes down because the crew mobilises once. Old slab in the way? Removal and replacement covers getting it out.

Where we do this work

Balwyn, Balwyn North, Camberwell, Canterbury, Glen Iris, Hawthorn, Hawthorn East, Kew, Kew East, Surrey Hills and the wider City of Boroondara.

Process

From enquiry to a surface you can use

  1. Enquiry

    Call or send the form with the suburb and the job. A site measure is booked, usually within a few days.

  2. Site measure and fixed quote

    Dimensions, fall, access and drainage are assessed on site, along with any permit the council requires. The written quote is fixed.

  3. Preparation and pour

    Existing surface removed and the area prepped, with base material brought in where needed. Steel laid, council inspection at the crossover where one applies, then the pour. Most residential jobs are one to two days on site.

  4. Cure and seal

    Vehicles off for seven days. Exposed aggregate is sealed after the concrete has cured.

Shed and garage slabs questions

How much does a shed or garage slab cost in Camberwell?

Shed and garage slabs run $110 to $150 per square metre supplied and laid, so a 6 metre by 6 metre garage slab typically lands between $4,000 and $5,500. Prices may vary with site conditions and variations; the written quote after a site measure is fixed.

How thick should the slab be?

A garden shed with normal use sits on a 100mm slab with SL72 mesh. A garage, studio or workshop where vehicles, racking or machinery will sit is specified at 125mm with SL82 mesh, with thickened edges where the manufacturer's drawings call for them. Tell us what is going on the slab and it is specified to match.

Do I need a permit for a shed slab in Boroondara?

The slab itself usually does not need one, but the structure on it may. Larger sheds and garages can require a building permit depending on size and siting, and in a heritage overlay the structure can need planning approval as well. Check with the City of Boroondara or your shed supplier before the pour is booked.

Can you pour a new slab where an old one is?

Yes. The old slab comes out first, the base is corrected, and the new slab is poured to the structure's drawings. Removal and disposal adds $35 per m² on top of the slab rate.

Call (03) 4824 0315 Get a quote